Machines/LUNAR 150 He HYBRID · IU 750
Lunar Hybrid
Direct clamping. Consistent force.
- Clamping capacity
- 80–150 ton
- Injection unit
- IU 750
- Model range
- LUNAR-80 HeLUNAR-110 HeLUNAR-150 He
- Fast cycling
- Energy efficient
- Innovative design
- High mould safety
- Ejector on fly
- Advanced control
- User-friendly operation
Medical
Pharmaceutical closures
Household ware
Thin-wall containers
Textile components
Electrical components
04 See it run
LUNAR 150 He HYBRID · IU 750
Closed-loop mould protection, twin pull-in cylinders and the hydro-electric clamp, shown through a full cycle.
Technical overview
Engineering overview.
India’s first hydro-electric injection moulding machine. A central ram applies clamping force evenly across the platen, so high mould protection comes without a cycle-time penalty. Clamp and injection unit both run on linear motion guides, ejector on fly is standard, and the design keeps maintenance to a minimum. Available in LUNAR-80 He, 110 He and 150 He.
- Central ram clampingDirect clamping force is applied evenly across the platen, protecting the mould.
- Linear motion guidesClamp and injection unit are guided linearly for straight, accurate platen travel.
- Ejector on flyEjection overlaps mould opening to shorten the cycle.
- Low maintenanceA short-stroke clamp cylinder uses very little oil, reducing service and contamination risk.
Clamp comparison
Constant clamping force from the centre ram construction; tonnage is easily and evenly adjustable through the cycle.
Force can vary as temperature expands the mould and tie bars; no direct indication of actual clamping force, and difficult to run below maximum tonnage.
Mould open/close cylinder supported by a linear motion guide for straight platen travel and accurate alignment with the fixed platen.
Movable platen cannot travel perfectly straight due to arm tolerances and link wear.
Central ram applies pressure evenly across the platen, preventing mould misalignment.
Toggles load the platen corners rather than the centre, creating a risk of platen deflection.
Short-stroke cylinder uses a small oil volume, designed to reduce or eliminate service; a cleaner clamping system.
Higher maintenance and wear; requires greasing, which can introduce contamination.
Model availability, specifications and injection unit options are confirmed at enquiry.
Application engineering